• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

upvc window repairs windows are an excellent option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great amount of damage to your home, which can make it very dangerous and potentially fatal. It is essential to ensure that your windows are in good working order.

For single pane windows, it is relatively easy to replace windows, and the new one is usually able to fit into the frame of the previous one easily. However, if you have double-pane windows that are anchored by internal beading, it will be more difficult to remove the old panes and put in new ones. In this situation, you will need to source some plastic spacers that aid the new pane in being able to fit properly into the frame of the window.

If you plan to try to remove the window panes by yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric and not onto the floor and could be trampled under.

Once the glass is removed from the window, it's best to seal the gap with clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional can come out and fix the window. It also acts as an obstacle to stop intruders from making their way into your home. If the distance between the door and the window is substantial, you may need to consider a security screen that also has windows. This will give you the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they are susceptible to a range of issues like sliding. A sagging window can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from getting worse.

Repositioning the hinges can aid in fixing a window which is sliding. First, you'll need to unblock the windows so you can access the frame. Then, using a screwdriver, you can unscrew the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you have repositioned your hinges. If you're satisfied with the fit of the window, tighten the screws to keep them in place.

If you are unable to reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause their tightness to decrease. It is important to replace your seal as soon as you can to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also loosen up. This is typically caused by screws that have been removed over time, but it could also be due to the handle mechanism wears out. It's relatively simple to repair a loose uPVC handle. The first step is to close the window and then perform an experiment to ensure that it fits. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn't you can use a screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

It is essential to take action if you awake each day to discover mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home and hinder your ability to control the temperature of your home. The most common cause for leaking uPVC windows is that the sealant around the frame is damaged or not present.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on how severe the issue is, old caulking might need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area more difficult to clean and could reduce the efficiency of your energy.

It is important to check that any drainage holes are free of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to note that if the leak is coming from between the glass of your double glazed window repairs glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open in a breeze it could be the hinges that are at fault. Any competent DIYer can replace hinges in just a few minutes.

Like any mechanical part hinges are prone to be damaged over time. It is essentially a simple procedure, but it is simpler when you have a person to assist in holding the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. You can check this by looking for the arrows on each hinge, this shows which way the window should be opened.

The problem can be caused by opening the window incorrectly or a faulty installation in the factory. This issue can be fixed by sending us a photograph on our website. We will be happy to give you suggestions.

It is also crucial to lubricate the hinges on a regular basis. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It also decreases the risk of a window sticking and prevent corrosion. This is recommended to be done at least every year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few various factors. Firstly the hinges, again because of wear and tear, may become displaced, which can cause gaps to develop between the sash and the frame. If they are beyond repair, it could be required to realign them. Second, the interlock can also become misaligned. This is located on the hinge's side and may need to be cleaned. In some instances it might be necessary to replace them.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and again will lessen the risk of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

With a little regular maintenance and repairs, your upvc windows will continue to provide an excellent level of security and insulation for your home. It is crucial to realize that all windows have a lifespan and there may come an point at which it is more efficient to replace them than repair them. So, if you're experiencing issues with your Upvc windows, it is recommended to seek assistance from a professional as soon as you can.