• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. They do not get rotten or rusty like timber and aluminum.

It is important to clean and oil UPVC windows and doors on a regular basis. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home, and could even be fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good repair.

For single pane windows, it is fairly easy to replace windows, and the new one will generally fit within the frame that was previously installed easily. However when windows with double panes are secured by internal beading, it'll be more difficult to take out the existing panes and install new ones. In this instance it is essential to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards fall onto the fabric and not on the floor, where they could be trampled under.

It's a good idea to seal the gap after the glass has been removed. This will keep drafts and water from getting into your home until a professional arrives to repair the window. This also serves as an obstruction to prevent intruders from getting into your home. If the gap is large, you may be interested in the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. Over time, they can be affected by a variety of issues such as sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. It is crucial to act when you realize that your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window which is sliding. To do this, you'll have to open the window to get to the frame. With a screwdriver, you can remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and test it for an appropriate fit. If you're satisfied with the fit, you can tighten the screws until they stay in position.

If you can't reposition the hinges you may require replacing the seal. Over time, rubber seals lose their elasticity and dry out and cause them to lose tightness. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and safe from drafts.

UPVC handles can also loosen up. Most often this is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's relatively simple to repair a loose Upvc Window Repair handle. First, you'll need to close the window and then perform a test fitting. The joint at the corners of the sash should align with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle and then turn the mechanism back into the position it was in.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it's crucial to take action. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant around the frame has been damaged or missing.

This is a fairly simple fix and should be undertaken by any skilled DIYer. Depending on the severity of the problem is, the old caulking may need to be removed. It is important to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and could decrease the efficiency of your energy usage.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage occurs between the double-glazed window, it is more likely the problem is with the seal than the frame. This can be easily repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with ease It could be hinges at fault. These are easily replaced by any competent DIYer and can usually be completed in just a few minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. It's easy to replace a hinge on a window, but it's easier if someone else helps hold the frame.

Verify that the uPVC hinges are open and closed in the right direction. You can do this by looking for the arrow on each hinge. This shows which way the window should open.

The problem can be caused due to opening the window in the wrong way or a faulty installation at the factory. This issue can be fixed by sending us a photograph via our website and we will be more than happy to give you suggestions.

It is also important to ensure that the hinges are lubricated regularly. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It can also reduce the chance of windows sticking and help prevent corrosion. This should be done at least once a year. WD40 or other solvent-based oils should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different things. The hinges, also due to wear and tear may become displaced, which will cause a gap to form between the sash and the frame. If they are beyond repair, it could be necessary to have them realigned. In addition, the interlock could be unbalanced. This happens on the hinge's side, and may need to be cleaned. In some cases it is possible to replace the hinges.

These seals can wear down or become damaged over time, allowing air escape. Installing high-quality weatherstripping will help to prevent draughts. Replace the windows made of Upvc with low-emissivity lenses. This will help to regulate indoor temperatures, and reduce draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be placed over your window sill. They will help block out cold air and keep your home warm and cosy!

Your windows made of upvc will continue to provide excellent insulation and security in your home by performing regular maintenance and repairs. It is crucial to recognize that windows last for a certain period of time and eventually, they will reach a point where it is more cost-effective to replace them rather than repair them. If you encounter any issues with your upvc window you should consult an expert immediately.