• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they don't get rusty or decay.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, which can make it very hazardous and possibly fatal. It is essential to take the time to ensure that you are doing everything you can to keep your windows in good shape.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames that were previously in use very easily. If you have double-paned windows which are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation it is essential to buy plastic spacers to help the new pane fit into the window frame.

If you plan to attempt to remove the window panes by yourself it is crucial to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth prior to when you begin working on the glass so that any shards will fall onto the fabric instead of onto the floor where they can be trampled on and cause further damage.

It's a good idea to seal the gap after the glass is removed. This will stop drafts and water from getting into your home until a professional comes out to repair the window. This will also act as a barrier that will prevent any intruders to gain access into your home. If the distance between the door and the window is substantial, you may need to consider an alarm system that has a window. This will provide the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. In time, they could develop a number of problems, including sagging. A sagging window can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from getting worse.

To repair a window that is sagging, you can try repositioning the hinges. To do this, you'll have to open the window so that you can access the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you've repositioned your hinges. If you're satisfied with the fit of your window, tighten the screws to secure them in place.

If you can't reposition the hinges, you might require replacing the seal. As time passes, rubber seals lose their elasticity and become dry which causes them to lose tightness. It is essential to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also become loose. The majority of the time this is due to screws that have come loose over time. However, it could occur because the handle mechanism has been worn out. Fortunately, it's easy to fix a loose uPVC window handle yourself. First, you'll need to close the window and do an experiment fitting. The corners of the sash must align with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle and return the mechanism to its original position.

3. Water Leaks

It is crucial to act if you awake each day to find a smoky wall and floors that are wet. Windows that leak water do not only lead to the degrading of the structure of your home but also hinder your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be completed by any DIYer who is competent. Based on the severity of the problem the caulking used previously may require removal before a new layer can be applied. It is essential to keep in mind that when it is about uPVC window repairs you should not be tempted to 'over-caulk and then make the area more difficult to clean and could reduce the efficiency of your energy.

Make sure that the drainage holes have no debris in them and that the sill pan is angled correctly to drain away from the window. In more serious instances, you may need to replace the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the problem is with the seal than the frame. It is also possible to be corrected by a uPVC window repairs specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open, or if it blows open with an ease. They can be easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that have hinges and like any mechanical part they are susceptible to wear and tear over time. It's very simple to change a window hinge but it's much easier if someone else helps you hold the frame.

Verify that the uPVC hinges are open and closed in the correct direction. This can be done by checking for the arrows on each hinge, this indicates which way the window should be opened.

The problem can be caused either due to opening the window in the wrong way or a faulty installation in the factory. Sending us a photo via our website will often solve the issue. We are always happy to give suggestions.

It is also crucial to ensure that the hinges are lubricated on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also reduce the possibility of a window getting stuck and stop corrosion. This must be done at a minimum once a year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges, also due to wear and tear may become displaced, which can cause gaps to develop between the sash and the frame. This can be easily repaired by giving them good clean, but in the event that they are beyond repair it may be necessary to have them aligned or replaced. The second is the interlock, which is on the hinge side of the window and can also become misaligned, again it may be possible to just give them a clean but in some instances it could be necessary to have them replaced.

These seals can wear down or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help regulate indoor temperatures and decrease the possibility of draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be placed over your window sill. They can keep your home warm by blocking cold air.

With a bit of regular maintenance and repair your windows made of upvc will continue to provide a great level of insulation and security for your home. It is crucial to realize that windows last for a certain period of time and eventually, they will reach the point when it's more economical to replace them than fix them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.