• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

The handles on your doors are worn out with time and require to be replaced. It is important to match the dimensions of the old handles when replacing them.

The top screw's position, the lever and the keyhole sizes are the three measurements that you need to check. Use the size guide to help you.

Inline Lever/Lever

A lever handle or lever is a modern door handle designed to work with new or replacement doors. This kind of handle is available in a variety of styles and finishes. This handle is available from several manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The uPVC/Composite door handles are made of sturdy materials and are ideal for multi-point lock doors that require a heavy duty design. The handles are inline, and they use the same screws and spindle to secure them. They can be easily installed on new or existing uPVC/Composite doors.

The handle can be positioned and angled to suit the needs of all users. The handle has been tested to 200,000 cycles, which allows for the assurance of the quality of the finish as well as the performance of the handle over time. The lever that springs is adjustable to fit a wide range of locks. This is particularly useful for doors with narrower openings where the cylinder is situated further back from the door. A shorter lever is an excellent option for doors where the latch could be activated by the thumb turn on the inside.

Lever Pad

A Lever Pad door handle made of upvc operates differently than lever handles found on most doors. These handle types are either operated by a single spindle or by two spindles, either inline or offset. They are typically utilized on UPVC doors with double glazing. They come in a variety of finishes and variations.

The handles have been tested to a minimum of 200 000 cycles and are available in several finishes, including White, Silver, Chrome & Gold. The finish is BS EN 1670 Grade 5 and is resistant to rust. This gives the handle an outstanding performance and durability for the purpose it was designed for.

All of the UPVC lever pad designs are supplied with the spindle and screws which allow them to be installed on an existing or UPVC Replacement Door Handles new uPVC door. The backplate fixation centers of 211mm permit a larger handle, which is typically a benefit when replacing an old or faulty multi-point door lock mechanism. These levers for handles are also spring-loaded, thereby solving the issue of handles that slide out of their horizontal position when not in use.

It is essential to match the PZ dimensions of both the multipoint lock and the uPVC doors when selecting the replacement handles for windows UPVC spindle and handle. This measurement is also referred to as the 'handle centre' or 'cylinder centres and is an essential aspect of matching up the appropriate handles.

Once you have the proper PZ size you will then be required to make sure that the handle lever pads and push pads are of a appropriate shape to accommodate the American with Disabilities Act (ADA) compliant handles for internal bifold doors that you need for your doors. These are typically of a round or square shape, with an internal lever as well as an external push pad.

The majority of UPVC Lever Pads we sell are spring-loaded. This means that they return to a horizontal position after not being used, rather than hanging and possibly sticking in the frame. This stops draughts from entering the home. The majority of UPVC lever pad handles come in both left and right handed models, allowing them to be installed on either side of doors.

Euro Cylinder

Cylinder locks are found on uPVC and other types of doors. They work with a key to unlock a cylinder case that will reveal pins that can be aligned with those inside the lock body, allowing them to turn a revolving cam, thus opening the door. Euro cylinders can be equipped with up to six pins, with both internal and external doors generally needing different levels of security.

The choice of cylinder is crucial. It is based on the type of use your doors and handles receive. For instance, exterior doors should be fitted with a higher security cylinder, whilst internal doors can be secured with an ordinary cylinder. Certain cylinders come with extra features that can improve security, such as anti-drill or anti-bump properties.

A euro cylinder needs to be properly measured to ensure that it is the right size for your door. The cylinder should be measured from the central fixing screw hole to the other end of the cylinder, including the thumb turn if you have one. It is best to do this with the lock in place however, in the event that this is not feasible, you can take it off and remove it to take measurements. A cylinder that protrudes beyond the handle and escutcheon may be vulnerable to attacks, such as lock snapping, so it is crucial to make sure it's not too long.

The design of the latest cylinders has anti-drilling and bump resistance features. These are designed to reduce attack chances by forcing the cylinders to rotate in a new direction. This can to deflect attacks and protect your door.

Some cylinders are designed to resist snapping. This is a common attack on cylinders. A specially designed tool is used to break the break line of the lock and then the front of cylinder is snapped off. This is a faster and easier way to gain access than through the use of a multipoint locking system. It also leaves less evidence of the burglary which can make it difficult to prove insurance claims.

Spring Cassette

This spring cassette sits in the base of your door handle's backplate, providing a spring solution to return the multipoint lock replace window handles back to their normal position after usage. In the past, a lot of these types of handle didn't have a spring built into them and without this they tend to droop or drop when the locking mechanism is disengaged. Adding this simple component is one of the most effective ways to fix this, and is an effective way to keep your bi-fold doors handles made of upvc from getting stuck in an open or closed position, as these aren't always simple to manually close by hand.

The spring cassettes were made to be used with a spring multipoint locks. They won't work with handles that are not sprung and you'll have to cut a hole into your backplate in order for them to fit. (Please see the image for a technical diagram). They are a replacement for existing broken or missing cassettes within the backplate of the door handle for various brands of uPVC doors. They are fitted with an elongated square that can accommodate an 8mm spindle, and are sold as a set.

These spring cassettes offer a great value solution to the issue of door handles that are sagging. They are simple to install and will extend the life of your uPVC door. For more information on our selection of uPVC accessories and spares, please feel free to get in touch with our team. We are available to assist you and give you professional advice.